Showing all 13 results
-
Controller “R”
€ 650,00Description
OVERVIEW:
The operating essence of Motion Control!
A device which completes electronics and long-lasting accumulators, which has 3 functions:
Tracking Shot, Time Lapse and Stop Motion with 2 different operating modes: Loop and Sync.
Total control about: speed, direction, acceleration and deceleration.
Quick ViewAdd to cartThe operating essence of Motion Control!
-
100 mm half ball
€ 89,00Description
OVERVIEW
Level your equipment easily, simply by adding ShooTools’ 100mm half ball head to your flat base one.
Realized through CNC process. The half ball head, that includes a 3/8” locking handle and a useful spirt level, is compatible with any tripod and hi hat.IN THE BOX
• 100mm HALF BALL
• LOOKING HANDLE 3/8″Quick ViewAdd to cartis compatible with any tripod and hi-hat.
-
Modula SR (single rail)
€ 59,00 – € 119,00Description
SINGLE RAIL
Add an extra rail to your set and take the advantage to create easily an extra slider!
You have only to move your actual Cart and Base Plates from one rail to the new one.
The perfect solution for the TimeLapse artist on the move ShooTools’ Extension plates is created to extend the size of your slider joining together several rails.Quick ViewAdd to cartExtend your Slider’s size
-
Modula CBP (KIT Carriage + Base Plates for Slider)
€ 252,00Description
The extra plates are designed to fit all modula’s sliders (manual and motorized)
All that you need!
IN THE BOX
- left base plate with side
- central base plate
- right base plate with side
- screws + Allen key
compatible with:
– Every Slider Modula
Quick ViewAdd to cartThe extra plates are designed to fit all modula’s sliders!
-
Sandbag
€ 39,00Description
OVERVIEW
This 33 lb (15 kg) counterweight bag is ideal to stabilise any ShooTools slider on any type of tripod or light stand in order to guarantee max stability of all shots, both in any location.
The sturdy a detachable, internal case, which be filled with sand, stones, steel or lead balls (not included).The bag comes with a handle for hanging on or risers and has a flap, which allows for the bag to rest securely on the base of a tripod. The bag has also a D-ring for use with a hook.
Made by technical cordura are also fully water resist, built to resist!
Quick ViewAdd to carthas two useful wings (draping over light/tripods easily).
-
MODULA BPT (KIT Base Plate for Modula)
€ 65,00Description
The extra plates are designed to fit all Modula’s sliders (manual and motorized)
All that you need!
IN THE BOX
- left base plate with side
- central base plate
- right base plate with side
- screws + Allen key
compatible with:
– Every Slider Modula
Quick ViewAdd to cartComplete your extra rails
-
Modula CAR (Carriage for Modula)
€ 187,00Description
The carriage is cut from a solid aluminium block using high-precision CNC processing, resulting in a heavy-duty capacity and incomparable strength.
A record number of eight ball bearings (two for each wheel) guarantees unparalleled smoothness and stability.
IN THE BOX:
carriage 2019 edition
4 wheelsallen key
compatible with:
– Every Slider Modula
Quick ViewAdd to cartHigh-precision CNC processing/heavy-duty capacity/incomparable strength.
-
Slider Bag
€ 65,00 – € 85,00Description
OVERVIEWThis way, all components are individually protected by the padding to prevent damage during transit.The special design also allows for the camera slider to be packed away with the video head attached, making packing quicker and easier. Two internal pockets allow to carry with you all the preferred accessories.Quick ViewAdd to cartThe Cordura® case is tear resistant and padded.
-
Modula BLT (3 mt. sincro belt)
€ 22,00Description
IN THE BOX
Sincro Belt 3mt long
compatible with:
– Every Slider Modula Motion Plus
Quick ViewAdd to cart3mt long for every Slider Modula.
-
Modula ESB (end stop board for Control Plus)
€ 32,00Description
OVERVIEW
This 33 lb (15 kg) counterweight bag is ideal to stabilize any ShooTools slider on any type of tripod or light stand in order to guarantee max stability of all shots, both in any location.
The sturdy a detachable, internal case, which is filled with sand, stones, steel or lead balls (not included). The bag comes with a handle for hanging on or risers and has a flap, which allows for the bag to rest securely on the base of a tripod. The bag has also a D-ring for use with a hook.
Easy to replace by yourself, suitable for all the Motion Plus Motorizations.Quick ViewAdd to cartSpare Part perfect to replace your End Stop Board.
-
Support Legs
€ 89,00Description
OVERVIEW
This pair of aluminium legs CNC machined is specifically designed to be universal for any camera sliders in the market, equipped with standard 1/4” male thread. The same used for quick release plates of tripods.
The height of the feet is easily adjustable and a practical locknut secures the feet to the selected height.
The feet can rest securely on any type of regular or irregular surface. The base of the feet has a non-slip rubber finish, that allow you to install the slider on any surface that you like, even the most delicate.IN THE BOX
A pair of Support Legs
Quick ViewAdd to cartIs specifically designed to be universal.
-
Turntable Autopan/Dolly 360
€ 119,00Description
OVERVIEW
Transform your AutoPan into a handly motorized Turntable
The Kit is designed to have in your productions an extremely functional 40-cm diameter turntable for still life photography and 360°shots.MANAGEMENT via APP
Connect AutoPan to your SmartPhone and select the ShooTools’ App (Android or iOS)
Smooth and constant rotating videos for amazing 360° shots.TURN 360
Connect your camera throw the dedicated Shutter Cable
and Set the number of shots needed.
AutoPan will do the rest!PayLoad Tunrtable on AutoPan: 10kg
PayLoad Turntable on Dolly: 15kgIN THE BOX
– 40-cm Turntable Disk
– Adapter for AutoPan
– Green Pad
– Black PadQuick ViewAdd to cartTransform AutoPan/Dolly360 into a handly motorized Turntable
-
Extension plates
€ 67,00Description
OVERVIEW
ShooTools Extension Plates, a smart base designed to suit Timelapsers’ needs to obtain extra long rails for shooting. A light small tool studied to offer a quick set up in order to be immediately on the move.
While the upper part of the plate is used to connect the rails, the lower part has got standard 1/4” and 3/8” holes to assemble/disassemble rapidly tripods or support legs.
The little plate has also got a rubber base in order to place the slider directly on delicate surfaces.IN THE BOX
– 2 x Extension Plates
– Professional Allen Key
– ScrewsQuick ViewAdd to cartA smart base designed to suit Timelapsers’.
